Issues

• NOISSUE - Pads of a rotated footprint keep the library angle

  absmach/synth#199 · Filter by author nyagamunene opened on Oct 15, 2026

• Bug: a QFN exposed pad cannot be declared when the stock symbol has no pin for it

  bug
  absmach/synth#194 · Filter by author JeffMboya opened on Oct 15, 2026

• Bug: the hierarchical schematic index puts every sheet in one row, forcing an A0 page that is 94% blank

  bug
  absmach/synth#193 · Filter by author JeffMboya opened on Oct 15, 2026

• Bug: the signal-integrity rules run on the un-routed baseline when copper is rejected

  bug
  absmach/synth#190 · Filter by author JeffMboya opened on Oct 15, 2026
  1

• Bug: E-SYNTH-POWER-003 cannot fire on a board that has decoupling capacitors

  bug
  absmach/synth#189 · Filter by author JeffMboya opened on Oct 15, 2026

• Bug: a clock arriving on a connector is reported as having no source

  bug
  absmach/synth#187 · Filter by author JeffMboya opened on Oct 15, 2026

• Bug: a plane stitching via is placed on another net pad, shorting two rails

  absmach/synth#183 · Filter by author JeffMboya opened on Oct 14, 2026

• NOISSUE - The via-in-pad check reads long pads as discs

  absmach/synth#178 · Filter by author nyagamunene opened on Oct 14, 2026

• NOISSUE - The exported schematic and PCB name their nets differently

  absmach/synth#177 · Filter by author nyagamunene opened on Oct 14, 2026

• Bug: a declared plane cannot be stitched on a fine-pitch BGA, and the suggested remedy does not exist

  absmach/synth#165 · Filter by author JeffMboya opened on Oct 14, 2026

• Bug: board outline swings 29 mm, non-monotonically, on a 1 mm part dimension change

  absmach/synth#158 · Filter by author JeffMboya opened on Oct 14, 2026

• Bug: three shipped parts do not match the KiCad libraries they name

  absmach/synth#157 · Filter by author JeffMboya opened on Oct 14, 2026

• Bug: the rp2350 part carries RP2040 pin numbers, so a board ordering RP2350A is laid out to another device

  absmach/synth#152 · Filter by author JeffMboya opened on Oct 13, 2026

• Bug: match_length and max_skew are dropped at the export boundary, and no .kicad_dru is written

  absmach/synth#147 · Filter by author JeffMboya opened on Oct 13, 2026

• Bug: esp32_c3_mini names a symbol and footprint that do not exist, and invents two USB pins

  absmach/synth#146 · Filter by author JeffMboya opened on Oct 13, 2026

• Bug: routed ground copper shorts the HDMI receptacle's signal pads, and the board reports only open nets

  absmach/synth#143 · Filter by author JeffMboya opened on Oct 13, 2026

• Bug: a declared keepout never reaches the exported board, so it constrains nothing

  absmach/synth#142 · Filter by author JeffMboya opened on Oct 13, 2026

• Bug: no via or fanout rule can be declared, so a BGA escape cannot be specified

  absmach/synth#137 · Filter by author JeffMboya opened on Oct 13, 2026

• Bug: via-in-pad cannot be declared by a board or a profile, only by a CLI flag

  absmach/synth#136 · Filter by author JeffMboya opened on Oct 13, 2026

• Bug: the capability descriptor denies skew enforcement that E-SYNTH-DRC-014 performs

  absmach/synth#135 · Filter by author JeffMboya opened on Oct 13, 2026

• Bug: edge legalisation nudges a pinned connector by the same offset every run, so placement never converges

  absmach/synth#133 · Filter by author JeffMboya opened on Oct 12, 2026

• Bug: the language reference omits class on connect, so every netclass an agent writes is inert

  absmach/synth#129 · Filter by author JeffMboya opened on Oct 12, 2026

• Bug: a net with a gap between collinear tracks is reported connected

  absmach/synth#123 · Filter by author JeffMboya opened on Oct 12, 2026

• Bug: a controlled-impedance pair cannot be pinned to a layer

  absmach/synth#118 · Filter by author JeffMboya opened on Oct 12, 2026

• Bug: only ground can be poured, so a multi-rail board cannot route

  absmach/synth#117 · Filter by author JeffMboya opened on Oct 12, 2026